Bespoke Machinery Housing

Our client, an engineering firm, asked us to produce a bespoke machinery housing for them. The size did not suit a normal container, so we manufactured it from scratch.

After the unit was built, it was fully shot blasted and painted to our clients specification. The louver vents were very important for the customer in terms of providing airflow to remove fumes from the machinery housed in the unit.

Special police notification was required before delivery of the unit because it was wider than usual.



New build steel unit 6027mm long x 2992 wide x 2269mm high (internal sizes)


Exterior shot blasted & painted internally & externally to dark colour of your choice
Shot blasting spec:
Surface Preparation: Abrasive Blasting to Sa2½
1 x Hempadur Zinc 17360 @ 40µm
1 x Hempadur Fast Dry 47140 @ 120µm
1 x Hempathane HS 55610 @ 80µm
C5-M medium durability


1.5mm mild steel corrugated sides, ends & roof panels
4.5mm steel chequer plate flooring (6mm overall)
100x50mm RHS bottom rails, end rails, top rails & cross members
5mm folded corner posts
2 x sets of container style doors complete with seals & locking bars
Full height louver in one door of each set only
1 x single steel personnel door