
Mr Box were recently asked by a client to build a bespoke containerised fire-fighting equipment store (or chacon as they are called in the industry).
This company supply equipment for the wind energy and offshore industries. Therefore there were a number of unique criteria that had to be met. The customer wanted a non-standard sized unit (25ft long). Mr Box decided to build the container from scratch rather than converting an existing ISO container.
Container Specifications
Newly Built Unit:
- 25ft x 8ft x 8/6
- Fully opening 1.0mm doors at the side with stainless steel locking bars and catches, steel hinges, door seals & covered barrels
- 5mm x 100×100 RHS corner posts
- 230x75x26 Channel bottom/top rails
- 150x75x18 Channel pockets and cross members
- 8 x corner castings in the original ISO positions for ease of transport and handling
- 1.5mm corrugated panels, sides, ends, and roof panel
- 1 x high security steel personnel door with glass viewing panel and emergency push bar escape mechanism
- 28mm marine plywood floor overlaid with 3mm aluminium durbar
- Interior primed grey (using zinc phosphate)
- Exterior painted in “Emergency Red”
Interior Lining:
- 50x50x3mm RHS lining bars
- 50mm Celotex insulation
- Lined using 18mm plywood board and finished in1.2mm white aluminium composite sheet
Certified Electrics included:
- 1 x 6way single phase consumer board
- 4 x 5ft twin vapour proof lights
- 3 x twin metal clad sockets
- 1 x metal clad light switch
- 2 x 1.5kw oil filled radiator’s c/w 2 no metal clad fused spurs
- 1 x 14litre dimple dehumidifier c/w metal clad fused spur(wall mounted)
- 32 Amp isolator/plug socket
- All in surface mounted plastic conduit
Interior Fit Out:
- 1 x stainless steel workbench 3mm thick 304 grade /mill finish with under bench compartments
- 12 x stainless steel coat hangers
- 1 x stainless steel bench 1.8m long
- 2 x stainless steel lashing points with retractable lashing straps
- 1 x stainless steel wash hand basin with 3 k/w hot water heater and removable maintenance cover